Please choose from the following categories:
What's New
NEW COVELIGHT PRODUCT
This product is specifically designed for coves where the effect of up-lighting is required in a cove.
The CoveLight is designed for Continuous interlocking straight runs to provide uninterrupted continuous light effect.
The fixtures are provided with quick connect looming plugs at each end to minimise installation time and ease of installation.
The product is applicable to cabinets, officeCove lighting, shopping centres and malls, Display cases etc.
So why don’t you enquire now with our sales department and see what we can do for you.
NEW ARCHITECTURAL PRODUCT RANGE
Harcroft lighting is proud to introduce to the Australian market our second wave of fully flexible architectural extruded lighting system.
As part of Harcroft Lightings continual investment in its products and client needs this product range is proudly fully locally manufactured and supported.
The HARLINE extruded lighting system can be custom designed for any project with an emphasis on providing an aesthetically appealing solution that enhances architectural interiors.
These luminaries can incorporate in combination a number of light sources such HID, Halogen, LED etc as downlights, wall washers’ fixtures and so on.
The flexibility of the extruded luminaries is inherent in their ability to accommodate louvers, flat lens’, reeded and opaque panels.
This is evidence of Harcroft Lightings constant pursuit of offering its clients wide variety of product offering to meet their clients needs.
So why don’t you enquire now with our sales department and see what we can do for you.
WEATHERPROOF
The new CORROSION and WEATHERPROOF (CW) series of luminaries has just been released. This product now supersedes the current weatherproof (CWK) range of fixtures.
The housing is of polycarbonate material in light grey colour. The gasket is a polyurethane material which achieves IP65 rating.
The diffuser is injection moulded polycarbonate with UV protection.
The diffuser has continuous formed perimeter on it that maintains true parallel sides providing a positive seal.
The exterior of the diffuser is clear smooth finish with lineal reeded prism on the inside of the diffuser.
Both ends of the diffuser are opaque so as to hide the lamp holders and utilise maximum useful light distribution from the diffuser.
The gear tray is manufactured in 0.7mm gauge zinc anneal and powder coated pearl white.
The stainless steel clips are a standard feature of the fixture. This stainless steel clip is also available as a tamperproof version.
The fixture is suitable for applications such as wet areas, swimming pools, washrooms, carparks, under canopy areas and very many other applications.
This fixture is also suitable for cold room and freezer applications in T8 version only.
The body is supplied either as a T8 and T5 version and the following bodies are standard stock items:
2x18W / 2x14W
1x36W / 1x28W
2x36W /2x28W
2x58W / 2x35W
NEW EMERGENCY PRODUCT RANGE
Further strengthening its foundation for future growth, Harcroft Lighting announces the release of the stand alone Emergency range of luminaries.
The Emergency Luminaire deliver a versatile and attractive range of Emergency Luminaires to suit any specification.
These are available in maintained, non-maintained and sustained versions with dual rate charge and high rate temperature rated at 70ºC Nickel Cadmium batteries.
Harcroft Emergency Exit Sign - HE
These fixtures are offered complete with Nickel Cadmium battery pack, Two hour emergency duration, large terminal block and quick connect gear tray assembly.
Harcroft Emergency LED Exit Signs - HLE
This is a breakthrough LED emergency Luminaire powered by energy efficient LED Technology. The HLE offers minimum power consumption and maximum life. The HLE is environmentally friendly, stylish and distinctive.
Harcroft Emergency Weatherproof Exit Sign - HEWP
This product is designed for tough and adverse environments. The single sided Exit Sign is fully weatherproof to IP67. This product will operate in adverse environments to -20ºC.
Harcroft Emergency Haloway - HW
This recessed 10Watt halogen emergency Light provides broad illumination that exceeds the Australian Standard requirements during Mains power failure. The simple design provides an architecturally appealing finish.It is available with 1.5m flex & plug, 6V 10W tungsten halogen lamp and white enamel casing for control gear.
Harcroft Emergency Floodlight - HF
This product utilises high powered halogen twin floodlights that are ideal for warehouse, car park and other general areas. This product comprises of 10W halogen lamps, high Temeperature nickel cadmium battery and is tested to AS/NZ 2293.1-1998 Australian and New Zealand Standards.
NEW ARCHITECTURAL LUMINAIRE
The Mallitt Beam
This product is the pride of Harcroft lighting. This product has been developed in collaboration with our key clients and the result is a stupendous light fixture.
The extrusion of this product has been designed in-house by Harcroft Lighting, tooled and manufactured here in Australia.Harcroft lighting is proud to introduce to the Australian market our first fully flexible suspended lighting system.
The Mallitt Beam was designed with flexibility inmind. It allows users to simply relocate the components along the channel top where one needs it. No more having to re-order newcomponents and waste valuable installation time.
It is available as stand alone, 1 or 2 module, orAny length required. It can be powder coated any colour a customer requires.
The versatility of the Mallitt Beam allows any combination of T5 fluorescent fixtures, downlights, LED spot lights, with options for speakers, infrared cameras etc.
| FEATURE | ADVANTAGE |
| Rigid Extrusion | No warping over long distances |
| Australian Made & Designed | Local production and local components mean quicker lead times |
| Plug & Play or Hard Wiring | Can be wired for plug & play so can be totally user friendly after installation by swapping components. Alternatively can be hard wired on site by installer according to customer requirements |
| Easy Component Access | On the T5 fluorescent fixtures the gear tray is easily accessible for maintenance |
| Flexibility | Only four screws and two plugs (if plug & play) or four wires from terminal blocks (If hardwired) and replace each module thus providing ease of change of product modules from the extrusion. |
| Extensive Array of Products Can be Used | T5 Fluorescent with Diffuser or Louvre, PAR 30 or G12 Metal Halide, LED Spotlights, Infra Red Camera base Plate, Speaker Base palte, Halogen Gimble Downlight. It is up to customers imagination what is installed on the extrusion. |
Just some of the applications this product is suitable for is :
· Supermarket Lighting in Trunking Format;
· Office Task lighting;
· Warehouses Being Re-Furbished to Offices;
· Art Galleries;
· Task Lighting for Office Workstations;
· Reception Areas;
· Lift Lobbies;
· Sloping Ceilings Areas in Offices;
· Retail Lighting;
· Board Rooms;
· Etc, etc…
So why don’t you enquire now with our sales department and see what we can do for you.
